Easy to Fix Epson Printer Error Code 0x83 By Expert

Epson Printer Error 0x83 arises Due to PIS failure (installation posture, contamination), Defective Fault Detection Plate (detached or peeled internal debris/contamination, or a hardware failure (bad print head, bad logic board, a faulty sensor, etc), and so on. So, if you are facing the same error, then you need to immediately Fix Epson Printer Error Code 0x83, by just pursuing the troubleshooting steps that advised the Epson printer tech service professionals. Thus, here are steps defined to fix this error, which you should follow instantly to come out this situational), Sensor failure (contaminated or damaged sensor), Bad Ink cartridge, in.

Solution 1:- Reset the Cartridges

First of all, you should remove all of the ink cartridges, and then clean the metal electrical contacts on the back, as well as where they meet up inside the printer, using rubbing alcohol. Dry well, and then reset the cartridges.

Solution 2:- Reset the Epson Printer

You should try to reset the Epson Printer to quickly solve the issue.

Solutions to Fix Epson Printer Error Code 0x83:-

• Unplug power at the wall outlet
• Wait 5 minutes.
• Then press and hold the “power/on” button for 1 minute.
• Keep holding, while plugging back in, and for another 1 minute and after, then release the button.
• Then again power “ON” the Epson printer. If the error is not fixed, then follow the next step.
• 
  

Solution 3:- Update Drivers

Sometimes, you get this Error Code 0x83 due to an old driver issue. Then you need to Update drivers, via use the driver update software, which is plenty available on the official software sites. To do this, you can also follow the below-given steps.

To update the driver for the Epson printer, follow these steps:-

• First, press key “Windows” key and “X” to open the control panel.
• Then choose the “Device Manager” option.
• Next, you need to find there finds the Epson printer to update the driver.
• Now, right-click on the device, and then select the “Update driver software” option.
• Then a pop-up window will see the two different options.
• Next, choose the first option “Search automatically for the updated driver software”, that is suggested by experts. Follow the steps of installing drivers.
• Validate, if the driver files are available on your operating system, then go and select the second option of “Browse my computer for the driver software”
• Now an Epson printer driver updating process has been completed.